Cottrell - TB Series Plastic Hubcap, Meritor  

HI SECTION O-RING KIT   BP4962 Cottrell | OEM Part Number: P4962

CONTROL VALVE SEALCO BRAKE LOCK VALVE FOR PTO Cottrell | OEM Part Number: 138397

Cottrell Valve Section Rebuild Kit (1998 and newer units) This valve section rebuild kit has five seals between the valve bodies. There is one the size of a quarter and four the size of a dime. These little rubber o-rings will prevent the hydraulic fluid...

Flow Divider Cap Cottrell | OEM Part Number: 04455A

Cylinder End Cap 2 in. IL | Cottrell To determine if you have an IL (IN-LINE) end cap or a 90-degree end cap, you need to look at your original cylinder hydraulic input connections. If both the top and bottom end caps and hydraulic hoses enter the...

Red Valve Handle Cover for Cottrell A soft plastic cover for the Curtis Wright valve handles used on the Cottrell units. Just slips right over the aluminum handle.  

Cylinder Packing Nut 2 in. | Cottrell Aluminum packing nut is for Cottrell cylinders. This piece would go on the end of the cylinder were the rod would come out to extend the decks. The center hole would fit an 1 ½” rod with a bore size of...

For Cottrell Cylinders. All seals are included. Alumunium Cottrell | OEM Part Number: C4539

To determine if you have an IL (IN-LINE) end cap or a 90-degree end cap, you need to look at your original cylinder hydraulic input connections. If both the top and bottom end caps and hydraulic hoses enter the cylinder in a straight-line fashion, then...

To determine if you have an IL (IN-LINE) end cap or a 90-degree end cap, you need to look at your original cylinder hydraulic input connections. If both the top and bottom end caps and hydraulic hoses enter the cylinder in a straight-line fashion, then...

To determine if you have an IL (IN-LINE) end cap or a 90-degree end cap, you need to look at your original cylinder hydraulic input connections. If both the top and bottom end caps and hydraulic hoses enter the cylinder in a straight-line fashion, then...

Seal LOK 90* Swivel 8-8 This fitting is made to be crimped. Fits ½” or #8 double braided steel hydraulic hose. Also known as an o-ring face seal fitting. It is zinc plated to prevent rust. Parker | OEM Part Number: 1J943-8-8

Seal LOK 90* Swivel 6-6 This fitting is made to be crimped. Fits 3/8” or #6 double braided steel hydraulic hose. Also known as an o-ring face seal fitting. It is zinc plated to prevent rust. Parker | OEM Part Number: 1J943-6-6

½” (#8) Seal LOK Straight Swivel Permanent fitting when crimped into place on a ½” hydraulic hose. This fitting has a swivel head to prevent your hydraulic hoses from twisting. Made from steel, zinc dichromate plating to help...

Parker Seal LOK Straight Thread 8-8 Enjoy tight positive hydraulic system sealing with Parker F5OLO0S Seal-Lok Straight Threads. They have a captive o-ring groove (CORG) to lower the risk of distortion during the assembly phase and keep the durometer...

3/8” (#6) Seal LOK Straight Thread This union will connect two female Seal LOK Straight Thread fittings. Made of steel, zinc plated to help prevent rusting. Parker | OEM Part Number: 6HLO-S

Seal LOK Straight 8-8 Female ½” From ½” steel double braided hose to ½” pipe, this fitting would work. With the swivel that this fitting has it will keep your hose from twisting. Made from Chromium. Parker | OEM...

seal-lok-elbow-6-6 Parker | OEM Part Number: 6/6/5503

This is a quick fix fitting when you are on the road for thermoplastic non-conductive hose when you are on the road and can’t get to a hydraulic shop. Chromium made to prevent rust. Ref#772274 Parker | OEM Part Number: 20651-8-8

Parker JIC to Male O-ring | 3/8 in. This union will connect a JIC female 3/8” to O-ring Male 3/8”. Made from steel, plated with zinc to prevent rusting. Parker | OEM Part Number: 6F50X-S