Knuckle Receiver Assembly | Roll-Off Equipment

Winch Cable Guide | Galfab This Winch Cable Guide is a part of Galfab's Hooker System for roll-off trucks.

Prox Switch 3 Prong | Galfab It is a component widely used in manufacturing operations where a metal target needs to be sensed. When proximity switch is close to some target object, it will send out control signal.This 3-prong Prox Switch is part of...

Left Hand Spring | Galfab This Left Hand Wound torsion spring is a part of a Galfab hoist system common to roll-off trucks.

Right Hand Spring | Galfab This Right Hand Wound torsion spring is a part of a Galfab hoist system common to roll-off trucks.

Mud Flap (Galfab Logo) | Galfab This Mud Flap features the Galfab logo.

Roller Spring Lock | Galfab  This Roller Spring Lock is compatible with a Galfab hoist system common to roll-off trucks.

Seal Kit for Return Filter | Galfab This Seal Kit is for a Return Filter, a component of a Galfab hoist system common to roll-off trucks.

Prox Switch, 4 Prong | Galfab It is a component widely used in manufacturing operations where a metal target needs to be sensed. When proximity switch is close to some target object, it will send out control signal.This 4-prong Prox Switch is part...

Sight Level Guage | Galfab This Sight Level Guage, part of a Galfab hoist system, comes with bolts and gaskets. For use with petroleum and water base hydraulic fluids.

Filter For Top of Oil Tank | Galfab This Air Breather Filter is part of a Galfab hoist system typical on roll-off trucks.

Cable Clamp for 7/8 in. Cable | Galfab This 0.875 in. Cable Clamp is used to secure the roll-off cable on a Galfab Hoist System.

2.5 in. Sheave Shaft  | Galfab Sheaves are used to direct cable or rope, lift/pull heavy loads and transmit power. This 2.5 in. Sheave Shaft is a part of a Galfab hoist system common to roll-off trucks.

Stationary Rear Hold-Down | Galfab This Stationary Rear Hold-Down is a part of Galfab's Hooker System for roll-off trucks.

Roll-Off Truck Fold Down Stops  Designed for Galfab Hoists This single fold down stop is designed for use on a Galfab roll-off truck hoist systems.

10 in. Sheave | Galfab   Sheaves are used to direct cable or rope, lift/pull heavy loads and transmit power. This 10 in. Sheave (without a block) is a part of a Galfab hoist system common to roll-off trucks.  

12 in. Sheave | Galfab   Sheaves are used to direct cable or rope, lift/pull heavy loads and transmit power. This 12 in. Sheave (without a block) is a part of a Galfab hoist system common to roll-off trucks.  

Hooker Cam and Spring Assembly | Galfab  This Cam and Spring Assembly is a part of Galfab's Hooker System for roll-off trucks.