7/8 in. x 78 ft. Rolloff Cable w/Bullet End | ECTTS This 7/8" x 78' wire rope roll-off cable is made in house from 6x37 EIPS with a machined ferrule swaged on the end for superior strength. This cable is used on the Galfab roll-off models below in...

5/8 in. x 70 ft. Rolloff Cable w/Pear Link | ECTTS Made from 6x25 extra improved plow steel (EIPS), this 70 ft. cable with pear link swaged onto one end is the most common cable for 20k and 30k single axle roll-off units.   Remember, it is...

7/8 in. x 85 ft. Rolloff Cable w/Bullet End | ECTTS This 7/8" x 85' wire rope roll-off cable is made in house from 6x37 EIPS with a machined ferrule swaged on the end for superior strength. This cable is used on the Galfab roll-off models below in...

Roll-off Cable with Bullet End | 7/8 in. x 93 ft.   This cable provides flexibility with a master link, allowing you to choose your attachments based on your needs or operate using the master link alone. The cable is 7/8 inch in size, offering a...

1/2 in. x 50 ft. Roll-off Cable w/Master-Link This cable provides flexibility with a master link, allowing you to choose your attachments based on your needs or operate using the master link alone. The cable is 1/2 inch in size, offering a Working Load...

7/8 in. x 71 ft. Roll-Off Cable w/Bullet End | ECTTS This 7/8" x 71' wire rope roll-off cable is made in house from 6x37 EIPS with a machined ferrule swaged on the end for superior strength. This cable is used on the Galfab roll-off models below in...

Knuckle Receiver Assembly | Roll-Off Equipment

7/8" x 78' Roll-Off Cable | Galfab   This 7/8" x 78' wire rope roll-off cable is made from 6x37 EIPS with a machined ferrule swaged on the end for superior strength.   This cable is used on the Galfab roll-off models below in addition to many...

5/8 in. x 63 ft. Roll-Off Cable w/Pear Link | ECTTS Made from 6x19 extra improved plow steel (EIPS), this 63 ft. cable with pear link swaged onto one end is the most common cable for 20k and 30k single axle roll-off units.   Remember, it is...

Winch Cable Guide | Galfab This Winch Cable Guide is a part of Galfab's Hooker System for roll-off trucks.

7/8"x 71' Rolloff Cable | Galfab This 7/8" x 71' wire rope roll-off cable is made from 6x37 EIPS with a machined ferrule swaged on the end for superior strength. This cable is used on the Galfab roll-off models below in addition to many other cable...

Cable Clamp for 7/8 in. Cable | Galfab This 0.875 in. Cable Clamp is used to secure the roll-off cable on a Galfab Hoist System.