Knuckle Receiver Assembly | Roll-Off Equipment

7/8" x 78' Roll-Off Cable | Galfab   This 7/8" x 78' wire rope roll-off cable is made from 6x37 EIPS with a machined ferrule swaged on the end for superior strength.   This cable is used on...

Winch Cable Guide | Galfab This Winch Cable Guide is a part of Galfab's Hooker System for roll-off trucks.

Prox Switch 3 Prong | Galfab It is a component widely used in manufacturing operations where a metal target needs to be sensed. When proximity switch is close to some target object, it will send...

7/8"x 71' Rolloff Cable | Galfab This 7/8" x 71' wire rope roll-off cable is made from 6x37 EIPS with a machined ferrule swaged on the end for superior strength. This cable is used on the Galfab...

Left Hand Spring | Galfab This Left Hand Wound torsion spring is a part of a Galfab hoist system common to roll-off trucks.

Right Hand Spring | Galfab This Right Hand Wound torsion spring is a part of a Galfab hoist system common to roll-off trucks.

Mud Flap (Galfab Logo) | Galfab This Mud Flap features the Galfab logo.

Roller Spring Lock | Galfab  This Roller Spring Lock is compatible with a Galfab hoist system common to roll-off trucks.

Seal Kit for Return Filter | Galfab This Seal Kit is for a Return Filter, a component of a Galfab hoist system common to roll-off trucks.

Prox Switch, 4 Prong | Galfab It is a component widely used in manufacturing operations where a metal target needs to be sensed. When proximity switch is close to some target object, it will...

Sight Level Guage | Galfab This Sight Level Guage, part of a Galfab hoist system, comes with bolts and gaskets. For use with petroleum and water base hydraulic fluids.

Filter For Top of Oil Tank | Galfab This Air Breather Filter is part of a Galfab hoist system typical on roll-off trucks.

Cable Clamp for 7/8 in. Cable | Galfab This 0.875 in. Cable Clamp is used to secure the roll-off cable on a Galfab Hoist System.

2.5 in. Sheave Shaft  | Galfab Sheaves are used to direct cable or rope, lift/pull heavy loads and transmit power. This 2.5 in. Sheave Shaft is a part of a Galfab hoist system common to roll-off...

Stationary Rear Hold-Down | Galfab This Stationary Rear Hold-Down is a part of Galfab's Hooker System for roll-off trucks.

Roll-Off Truck Fold Down Stops  Designed for Galfab Hoists This single fold down stop is designed for use on a Galfab roll-off truck hoist systems.

10 in. Sheave | Galfab   Sheaves are used to direct cable or rope, lift/pull heavy loads and transmit power. This 10 in. Sheave (without a block) is a part of a Galfab hoist system common to...

12 in. Sheave | Galfab   Sheaves are used to direct cable or rope, lift/pull heavy loads and transmit power. This 12 in. Sheave (without a block) is a part of a Galfab hoist system common to...

Hooker Cam and Spring Assembly | Galfab  This Cam and Spring Assembly is a part of Galfab's Hooker System for roll-off trucks.

"The Hooker" Securement System (Set) | Galfab Tired of constantly replacing straps on your rolloff unit? Introducing Galfab's innovative, adaptable securement system. This system is designed to...