When you can’t find the right fork try our versatile 9″ tall fork and use the chassis frame as lifting point as shown in the illustration. Here, one finger of the fork enters a hole in the cross member and prevents the towed vehicle from sliding. Attach...

Chain forks can be used in many ways. As shown below the chain fork lifts a completely wrecked truck -no axles or tires -and the under reach functions as a tow bar. The chain forks are milled from one high tensile steel bar and accept 1/2″ to 5/8″ chain...

Chain forks can be used in many ways. As shown below the chain fork lifts a completely wrecked truck -no axles or tires -and the under reach functions as a tow bar. The chain forks are milled from one high tensile steel bar and accept 1/2″ to 5/8″ chain...

Detroit low oil pan fork, allow clearance for the oil pan.

Gillis Bus Fork

The half round fork is used mostly to lift trucks with tailgates and construction trucks where big cross tubes are part of the body. The photos show (l. to r.) the fork used for a tailgate truck, a cement truck, and a construction truck picked up at the...

Picture shows (left to right), the self loading fork in operating mode. When the trigger contacts the axle (middle picture) the spring loaded fork finger rotates into position behind the axle.

The self aligning spring fork is one of the most popular forks and attaches to the spring itself. Four different positions for the fork lock pin ensure a snug fit. The fork hinging feature permits alignment with the spring during lift. The spring hangers...

The self aligning spring fork is one of the most popular forks and attaches to the spring itself. Four different positions for the fork lock pin ensure a snug fit. The fork hinging feature permits alignment with the spring during lift. The spring hangers...

The new tube axle on the Ford Super Duty model 2002 require a special fork that prevents the axle from denting. Pete Soro’s new half round fork fits snug around the acle and is designed to prevent this from happening. Using regular frame forks will...

This fork is designed to fit between the U-bolts. This type of lift will prevent the truck from sliding since the U-bolts prevent the fork from moving along the axle.. The fork opening is 2.5″ which fits the typical light to medium size truck axles...

This fork was designed for heavy construction trucks lifting by the axle. When nothing really fit try this very versatile fork.

The new Hendrickson STEERTEK AXLES doesn’t allow use of forks on the axle itself. See Hendickson Technical Bulletin below. Freightliner as well as Vovlo trucks use the new axle and school busses will be equipped with same axle from July 2003. Next year...

Extra low profile fork