Cottrell Load/Skid Stop With 2 bolts in place you will be able to position this load skid stop to the position you need it. When pulling out your load skids this will stop the skid from being pulled...

3/4 in. Cylinder Pin | Cottrell Constructed with high-quality steel, our Cottrell Cylinder Pin ensures exceptional strength and resilience, capable of withstanding heavy loads and intense pressure...

Spool Valve Replacement | Cottrell This is for inside of the valve, right under the handle. The rod is harden plastic, with a spring on the top so when the handle is pulled, the spring will push the...

Cottrell Hydraulic Valve Section 2-Port This is a Curtis Wright valve section, used on Cottrell Trailers. It has two hook-up ports for the hydraulic lines. One port is used for the supply of the...

Cottrell Hydraulic Valve Ball Check Kit The hydraulic valve ball check kit includes two ball bearings and two springs. These four little pieces prevents the hydraulic fluid from flowing back into the...

Black Valve Handle Cover for Cottrell A soft plastic cover for the Curtis Wright valve handles used on the Cottrell units. Just slips right over the aluminum handle.  

Cylinder Packing Nut Telescoping - Small, All seals are included. Alumunium. Cottrell | OEM Part Number: C4545

To determine if you have an IL (IN-LINE) end cap or a 90-degree end cap, you need to look at your original cylinder hydraulic input connections. If both the top and bottom end caps and hydraulic...

Telescopic Cylinder End Cap | Cottrell 90 Degree End To determine if you have an IL (IN-LINE) end cap or a 90-degree end cap, you need to look at your original cylinder hydraulic input connections...

2.5 in. Cylinder Packing Nut | for Cottrell Trailers Packing nut 2 1/2" For Cottrell Cylinders. Actual measurement is 2 7/8" with 1 1/2" rod. All seals are included. Alumunium. Cottrell | OEM Part...