East Coast Truck and Trailer Sales

Pinterest  blog  linkedin  twitter  facebook  twitter  

No. of Items - Total Value - $0.00

QUICK ORDER

Shopping Cart:

0 item(s) - US$ 0,00

Fabricated Parts

Artículos 1 a 10 de 92 en total

Página:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Lista  Cuadricula 

Configurar sentido descendente
  1. 46" x 15" steel flipper w/ 2 idlers

    46” by 15” steel flipper will give you little more extra room when loading. Also when the flipper is flipped out you can cover the space that is left between your decks when you set them up for loading. With the idlers welded to the flipper already it will keep your chains from dragging on the ground. 15” wide and 46” long. Unpainted. Reference #536414 kit, 57568 idler. Saber más
  2. 8' Jump Skid Cottrell

    With a head rack, there is always the position behind the cab that needs to be loaded. These ramps will be what you drive over in order to load that position. In order to find out the length that is needed take a measure from the bottom front trailer position to the skid seats welded to your head rack. This will tell you what size is needed for the distance that you have to go in order to load this position. The skids will hold a vehicle. Aluminum. Cottrell Saber más
  3. 13” Pogo Stick Spring

    Slide this spring over your hydraulic hoses and keep them from getting snagged. Keeps your hoses were they belong Saber más
  4. 19 Skid Pin

    To secure the jump skids in the skid seats. Slide the pin through the end of the skid seat and then through the skid and then through the other end of the seat. This way when driving across your jump skids you will not have to worry about the skids coming out of the position. Saber más
  5. 22 Skid Pin

    To secure the jump skids in the skid seats. Slide the pin through the end of the skid seat and then through the skid and then through the other end of the seat. This way when driving across your jump skids you will not have to worry about the skids coming out of the position. Saber más
  6. 25” Aluminum Flipper Left Hand with 2 Idlers

    25” by 15” aluminum flipper will give you little more extra room when loading. Also when the flipper is flipped out you can cover the space that is left between your decks when you set them up for loading. With the idlers welded to the flipper already it will keep your chains from dragging on the ground or falling below the top decks and damaging the vehicles below. Saber más
  7. 36" Flipper w/ 4" Extension

    With the extension in place it makes for a smooth track without the bumps when you drive up to the flipper. 15” wide and 40” (with extension) long. Unpainted. Reference # 536414 mounting kit., 57568 flipper idler Saber más
  8. 5/8” Pretzel Lock – Left Hand

    This three-sided pretzel lock will fit into a 5/8” pinhole. With the way it is placed and turned the lock will stay in place even during traveling. When the lock is in its proper location it prevents the deck from coming down, when the deck is in the up position. The pin is made for the driver side of the unit. Saber más
  9. 5/8” Pretzel Lock – Right Hand

    This three-sided pretzel lockwill fit into a 5/8” pinhole. . With the way it is placed and turned the lock will stay in place even during traveling. When the lock is in its proper location it prevents the deck from coming down, when the deck is in the up position. The pin is made for the passenger side of the unit. Saber más

Artículos 1 a 10 de 92 en total

Página:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Lista  Cuadricula 

Configurar sentido descendente